Orders & Support +44 (0)1543 500 044
INQ-2525-BC-Med View full size


Box size: 25mm x 25mm x 6.5mm

Box type: black conductive 

Retention: medium

More details

exc. VAT£ 1.80 inc. VAT£ 2.16

Materials of construction

The gel boxes are made from semiconductor grade polypropylene material, pre-mixed with pure carbon powder and injection moulded

The gel material is a proprietary elastomeric material, with low outgassing suitable for the transport and storage of delicate parts.


Box material properties.

The gel boxes are classified as electrically conductive, having a surface resistivity of less than 10-5 ohms/sq, a volume resistivity of less than 100 ohm – cm, and a static decay time of less than 10 seconds. These properties as defined in ASTM 0-257-78. The maximum operating temperature for the boxes is 70 degrees C.


Gel material properties 

The gel material is a non-Silicone elastomer, which means it will not inhibit soldering, eutectic bonding or gluing. Components requiring any of these production steps can therefore be placed on the gel without the possibility of inhibition. Outgassing and ion contamination tests carried out by customers indicate that the material exhibits very low outgas and very low ionic contamination.



No products

£ 0.00 Shipping
£ 0.00 Total

Cart Check out